Re: [oopic] Re: Sharp GP2D12

Mike,

Virtual Circuit is the OOPIC term for linking objects together to do
processing that happens far faster than scripts run.

DLC

Mike Martin wrote:
> Hi Richard and thanks.I'm using real circuits and components on a
> prototyping board (ie not virtual circuits). Would it be easier just to
> use virtual circuits? I take it that because the sensor outputs a
> varying voltage it's an analog output?
>
>
>> If you assign analog signals to IOLines 1..4 then all of them set to
>> analog.
>>
>
> If I put a (real) wire from IOLine 1 onto the Vo line of the sensor and
> the assign it
>
> Dim IR as New oA2D
> IR.IOLine = 1
>
> then can I do something with IR.Value? Say switch on an LED at some
> threshold? I did what Bill suggested and put it on a multimeter and
> measured Vo with respect to GND and got varying values, so I know the
> sensor works.
>
> Mike M.
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/