Re: [oopic] after i load program to OOBoard oopic B2.2+ i can't connect to the board serial

Please see the "cosmic wedgie" fix. You have created a program that
interferes with the system being able to get control of the serial
port. Just search the archive for "Cosmic Wedgie" and you'll get the
series of steps to recover from it.

DLC

abdelmenem_salem wrote:
> hi sir
> i have the roguerobotics with the oopic b2.2+
> after i upload this programe to the board i can't connect to it again
> and the serial connection stop.
> suddenly hile it works it stoped
> when turn it on the motore move slowly for 3 second and stop
> i cant connect it to the computer
> all led works ok
> all built in switch and leds respond ok when press a swith the led is
> turned on
> i attached the error message i recive when try to connect it to the
> computer to upload a programe also i can't erase the eeprom
> i use a serial cable
> please try to help me quickly tell me what can i do to slove this
> problem
> I shorted those ESTOP pads and switch the board on and also can't
> connect to the board via serial port
> can any one help me please
> thanks
> ' ex 5-2
> Dim LeftServo As New oServoX
> Dim RightServo As New oServoX
> Dim Measure As New oIRRange
> Dim Spk As New oSpeaker
> Dim LCD As New oLCD
> Const TooClose = 70
>
> Sub Main()
> Measure.IOLine = 3
> Measure.Center = 20
> Measure.Operate = cvTrue
> LeftServo.IOLine = 29
> RightServo.IOLine = 30
> RightServo.InvertOut = cvTrue
> LeftServo.Value = 127
> RightServo.Value = 127
> LeftServo.Operate = cvTrue
> RightServo.Operate = cvTrue
> Do
> If Measure.Value < TooClose Then
> ' Start Turning
> RightServo.Value = -127
> While Measure.Value < TooClose
> '' Keep Turning
> ' Spk.Beep(100,50,3)
> ' Delay=300
> ' Spk.Beep(50,100,3)
> ' Delay=50
> Spk.Beep(64000,100)
>
>
> Wend
> ' Now continue turning for a little longer
> ooPIC.Delay = 50
> ' Now go forward
> RightServo.Value = 127
> End If
> Loop
> End Sub
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/