[oopic] Re: Wrong IOpack for Stepper Motor - Works fine for B.2.2+ as well.

hi not sure of what is wrong but when i entered the code on my C.1.1 on
the OObot from oricom tech. the output logic doesn't "come" out
properly.

Below is a video
http://www.youtube.com/watch?v=ARCwyBnGrSg

I tested the voltage output using a mulitmeter from pin 8-15 (i.e.
iopack 1 & 5) but the logic doesnt change in those pins.... anyone
knows any idea wat could be wrong?

Minghui

--- In oopic@yahoogroups.com, "scottmsavage" <smsavage32@...> wrote:
>
> --- In oopic@yahoogroups.com, "rtstofer" <rstofer@> wrote:
> > > > SO anyone knows whats is wrong with the Iopack specifications?
>
> I have now tested the code (as posted) with both the B.2.2+ and the
> C.1.1.
>
> Ver 6 Compiler:
> Ver B.2.2+ chip: http://www.youtube.com/watch?v=ltEjI58wBE8
> Ver C.1.1+ chip: http://www.youtube.com/watch?v=cZ-eoSWYssw
>
> Works perfect!
>
> Scott Savage.
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/