[oopic] general trouble shoot question

Hi,
It's been a while since I've used an OOPic so forgive me. I'm using the OOPic to run a DC
motor via the Magnevation dual control board. The code I'm using worked last time I used
this board. (a year ago at least) Now it's not. The motor does a small step each time I hit the
re-set on the OOPic. After testing and confirming the OOPic is working and has power etc. I
was wondering if someone could give me a clue what to check next. The mag board seems
okay and I've never had an issue with one before. I'll recompile the code again next to see if
that helps. Thanks!
D.

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/