OOPIC Forum

This Forum is Dedicated For all The Object Oriented PIC Lovers .......... The concept behind OOPic is straight forward. Use preprogrammed multitasking Objects from a library of highly optimized Objects to do all the work of interacting with the hardware. Then write small scripts in Basic, C, or Java syntax styles to control the Objects. During operation, the Objects run continuously and simultaneously in the background while the scripts run in the foreground telling the objects what to do.

Thursday, January 31, 2008

[oopic] SCPI commands

Has anyone tried using the SCPI on an OOPic device. I have my hardware
set up to send and receive but am unsure about the formating of the
data stream. The default it 9600,n,8,1 but the commands are listed as
an ascII string something like CONFigure:VOLTage:DC 0.5 <CR><LF>. (The
Caps are what is supposed to be sent). This is from a VB example.

As the meter is out of town I cannot check any code till I get it back
but would it be as simple as sending out the
string "CONF:VOLT:DC0.5"&H0D&H0A


Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/

Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)