[oopic] Re: Roboteq motor controller.

--- In oopic@yahoogroups.com, "rtstofer" <rstofer@...> wrote:
>

>
> Both processors use the GNU toolchain appropriate to their
> architecture. The toolchain is free, of course.
>

> If you need a tutorial about setting up the GNU toolchain for the ARM
> processor under Windows, send me a private email and I'll send it to
> you. Expect about 11 MB. I can't attach documents to email from
> Yahoo groups. Otherwise, research GNUARM for Linux.
>
> Richard
>

Hey Richard, do you have some links for where to download the GNU
tools that work with the Olimex board, for ops under Windows? Do you
know if anything special is needed on the pcbs for downloading? EG,
special hardware on the pcb or maybe downloader resident in the cpu
chip?

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/