I checking into the libraries mentioned below in this thread. In the
v6 compiler, there were multiple errors with the slave libraries. I
wrote to the author (Neil Durant) about them and received the
following:
"Hi Mike,
Many thanks for your interest in my OOPic Net and EEPROM libraries.
Unfortunately, due to work priorities etc, I haven't been able to
find the time to work on the OOPIC or my robot project for a year or
so, and so have also consequently been unable to check compatibility
with the v6 release etc. The libraries available on my site were
written for the v5 compiler. I can therefore offer you very little
assistance.
However, in the spirit of open source and collaboration, you're very
welcome to do the debugging and compatibility fixes yourself, and I'd
be delighted to host such changes for wider use, with suitable credit
of course!
You may consider posting to the OOPIC forum to see if anyone else has
already done any work on these libraries in terms of compatibility
with the
v6 compiler.
Best regards and good luck!
Neil"
So I was curious if anyone else had tried these out and had
desire/ability to investigate these issues with these libraries in
the V6 compiler? Meanwhile, I'm going to try them out with the
older v5 compiler to see if it has similar problems.
Mike
--- In oopic@yahoogroups.com, "Dennis K. Deckmann" <dkdeckmann@...>
wrote:
>
> I think this is what he is looking for...
>
> I2C Multiple OOPIC Networking Libraries
> =======================================
>
> A pair of user classes for the OOPIC microcontroller allowing
> networked
> OOPICs to share a buffer of bytes held within the slave OOPIC.
>
> Contributors: Neil Durant <neil@...>
> David Allen (conversion to BASIC)
> Website: www.octrix.com (Follow the 'downloads' link)
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment