compile with the v6 compiler. The word "RAM" must be reserved in v6
but not v5, so changing this line:
Dim RAM As New oRAM
to something like
Dim R As New oRAM
and then updating the name to all the references to that object
allows the code to compile.
--- In oopic@yahoogroups.com, "Mike Smith" <msmith@...> wrote:
>
> All -
>
> I checking into the libraries mentioned below in this thread. In
the
> v6 compiler, there were multiple errors with the slave libraries.
I
> wrote to the author (Neil Durant) about them and received the
> following:
>
> "Hi Mike,
>
> Many thanks for your interest in my OOPic Net and EEPROM libraries.
> Unfortunately, due to work priorities etc, I haven't been able to
> find the time to work on the OOPIC or my robot project for a year
or
> so, and so have also consequently been unable to check
compatibility
> with the v6 release etc. The libraries available on my site were
> written for the v5 compiler. I can therefore offer you very little
> assistance.
>
> However, in the spirit of open source and collaboration, you're
very
> welcome to do the debugging and compatibility fixes yourself, and
I'd
> be delighted to host such changes for wider use, with suitable
credit
> of course!
>
> You may consider posting to the OOPIC forum to see if anyone else
has
> already done any work on these libraries in terms of compatibility
> with the
> v6 compiler.
>
> Best regards and good luck!
>
> Neil"
>
>
> So I was curious if anyone else had tried these out and had
> desire/ability to investigate these issues with these libraries in
> the V6 compiler? Meanwhile, I'm going to try them out with the
> older v5 compiler to see if it has similar problems.
>
> Mike
>
>
>
> --- In oopic@yahoogroups.com, "Dennis K. Deckmann" <dkdeckmann@>
> wrote:
> >
> > I think this is what he is looking for...
> >
> > I2C Multiple OOPIC Networking Libraries
> > =======================================
> >
> > A pair of user classes for the OOPIC microcontroller allowing
> > networked
> > OOPICs to share a buffer of bytes held within the slave OOPIC.
> >
> > Contributors: Neil Durant <neil@>
> > David Allen (conversion to BASIC)
> > Website: www.octrix.com (Follow the 'downloads' link)
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment