Re: [oopic] first time use

What ooPIC are you using? The ooPIC R will have the IOLine labeled as
the actual IO line, the ooPIC S boards you need to cross-reference the
IOline to the physical pin.

DLC

funreido wrote:
> I just starting to use it. I was trying to use first application with
> 220 ohm resistor and led. I got download into eeprom. But the light
> wont comes on. I test it with volt meter and there is no voltage
> output. I test pin 21 and 23 and I see 5 volts output and I use it
> with led and resister. It was working fine. Here is program I use it
> for led.
>
> Dim Fred As New oDio1
>
> Sub Main()
> Fred.Ioline = 7
> Fred.Direction = cvOutput
> Fred = 1
> End Sub
>
> I tried to use 11 for pin 11 or 5 for pin 5. Still not working. What
> did I do wrong? I just same parallel cable and 9 volt cable that comes
> with it.
>
> Reid
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/