>
> > Yes, been there, done that. For whatever the reason, on my
> computer, every comport below #9 indicates already in use, even
though nothing is connected to the USB ports. I cannot select a
comport value in the oopic IDE range.
>
> Go ahead and select a port that is '(in use)' like COM4. I
wouldn't select COM1 or COM2 if they physically exist on the computer
as hardware serial ports or internal modems. Up comes a dialog
> complaining about the conflict. Click on Yes to confirm your
choice to hose your system.
>
Hey Richard. Thanks. That actually did work. I changed the port
assignment, despite the warnings from the OS, and the change took
place ok. I didn't even have to reboot. In addition, oopic IDE v.6
was able to find the serial cable alright, since it was now <= COM6.
I'll try the rebooting next to see if it stuck.
> Then close things out and reboot. The USB port will be reassigned
> when Windows restarts.
>
> I know this works because I just changed a USB->Serial adapter on
> COM13 to COM4 which was in use but not connected.
>
> With Hyperterminal, the USB->Serial adapters don't always connect
on the first time HT is started. It isn't unusual for me to have to
> close the instance and start it over.
>
> Richard
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment