[oopic] first time use

I just starting to use it. I was trying to use first application with
220 ohm resistor and led. I got download into eeprom. But the light
wont comes on. I test it with volt meter and there is no voltage
output. I test pin 21 and 23 and I see 5 volts output and I use it
with led and resister. It was working fine. Here is program I use it
for led.

Dim Fred As New oDio1

Sub Main()
Fred.Ioline = 7
Fred.Direction = cvOutput
Fred = 1
End Sub

I tried to use 11 for pin 11 or 5 for pin 5. Still not working. What
did I do wrong? I just same parallel cable and 9 volt cable that comes
with it.

Reid

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/