[oopic] Resetting ooBoard with ooPic

Goodmorning All,

I a new owner of a ooBoard with an ooPic. The board is working great, however i'm having a problem. I've tried to set the board in a different baud rate, which ( i guess ) went ok. However, tt this point i cannot communicate with the board anymore. So i tried to set the serial port back to the standard (9600) baudrate. As there is no communication possible, there is no way to do this. I've tried to reset the board, without succes. How can i reset the board that it goes to the default settings again? It is not possible to take the eeprom off the board.

Thanks for your help.

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/