Re: [oopic] I2C problem need help

What kind of ooPIC are you using? Have you checked power? Use a DVM
from ground to the VCC line (which one depends upon what ooPIC you are
using), it should be 5V +/- .1V or so.

DLC

orkuncanga wrote:

>hi guys;
>i was able to run some programs on oopic first. but later after i had
>tried some different programs it had given such an error:
>
>I2C is giving 0, while 1 expected...
>
>what can i do to fix it. i really need some help fastly.
>
>thanks.
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/