[oopic] Finally got OOPIC working and LCD: Now new questions...

Okay, got my OOPIC working with 4X20 LCD. Next I need to know how to
integrate a voltage reading from an I/O line. I need to read one
voltage that is between 0-5vdc and another that is 0-60vdc. I see the
object to do this but wonder about how to hook up the signal/hardware
and how to create a string from the periodic reading of the line into
a decimal I can send to the display. If you have links, great, I am
not a very accomplished programmer. Thanks,

Jeff K. Burbank, CA

P.S. I am now using a USB to serial cable with my XP computer. I am
using vers. 6 software. I will eventually want to connect to the
parallel programming port because my application (not robot) will be
connected to the RS-232 serial all the time. So, since my computer
has no parallel port, is there any trick for this?

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/