[oopic] Single 6V battery constraint

For a competition, batteries are constrained to 4 x 1.5V batteries (or
a 4.8 single battery pack).

The plan was to use ooPIC oServerSP Object to control direction and
speed of an RC servo-motor.

However, notes at www.oopic.com/oservosp.htm advise:

"be sure not to power the servo from the same power supply as the
ooPIC. A servo will pull large amounts of power in quick surges
causiong the servo's power supply to periodically drop below 4.5
volts.. The ooPIC has a brown otu circuti that resets the ooPIC if its
power goes under 4.5 volts. Using separate power suppplies will
prevent the ooPIC from resetting when driving a servo".

Is there a workaround for this problem, or does the constraint
effectively eliminate the use of the ooPIC for this competition?

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/