This Forum is Dedicated For all The Object Oriented PIC Lovers .......... The concept behind OOPic is straight forward. Use preprogrammed multitasking Objects from a library of highly optimized Objects to do all the work of interacting with the hardware. Then write small scripts in Basic, C, or Java syntax styles to control the Objects. During operation, the Objects run continuously and simultaneously in the background while the scripts run in the foreground telling the objects what to do.

Saturday, October 20, 2007

Re: [oopic] Re: OOPic-R board problem

If you have an EEPROM from an ooPIC R board that works and that EEPROM
will have no response on the other ooPIC R board then as long as they
have the same firmware you can best assume that the second ooPIC R board
is not working. Is this a new board or has it been working until
recently? The difference is that one will be a warranty replacement and
the other will need to be repaired.

DLC

robot8868 wrote:
> I test the voltage between PIN 1 & 8 of the EPROM and it measures at
> 5V. That means the small regulator is working. I also try
> the "cosmic wedgie" recovery and it does not help. Then, I use
> another OOPIC-R board and program the EPROM successfully. But puttig
> it back on the problem OOPIC-R board has no response. The EAC light
> is not ON at all. Is the board defective?
>
> --- In oopic@yahoogroups.com, <dennis.clark@...> wrote:
>
>>first, try the"cosmic wedgie" recovery. Let us know if that works.
>>
>>DLC
>>
>>
>>ooPIC Tech Support
>>
>>-----Original Message-----
>>
>>From: "robot8868" <robot8868@...>
>>Subj: [oopic] OOPic-R board problem
>>Date: Thu Oct 18, 2007 11:24 pm
>>Size: 918 bytes
>>To: oopic@yahoogroups.com
>>
>>I have an OOPic-R board with firmware C.1.1+. After applying the
>
> power
>
>>to the board, the power good LED does NOT light up. Connect
>
> through RS-
>
>>232 with PC does not show any response. But pushing the 3 little
>>buttons on the board do light up the LED on top of it. Is the
>
> board
>
>>defective? How I can check if the OOPic is working ok?
>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------



Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/

No comments: