[oopic] Re: OOPIC C1+ Firmware

Well, in a way that's a relief to hear that someone else has given a
shot at it and had troubles as well. That's exactly why I was hoping
to get it to work: virtual circuits to pass through servo commands
until I wanted to do something different with them. Are you using a
Vex transmitter/receiver? If so, might oRCIN not be perfectly mated
signal-wise with the Vex as previously mentioned in this forum? I'm
shooting from the hip here in hopes that these discussions will lead
to the solutions with oRCIN...

Jonathan

--- In oopic@yahoogroups.com, "tinslwc" <tinslwc@...> wrote:
>
> I tried to use this object a few weeks ago and could not make it
> work. I ended up using a multiplexer, having the OOPic select the
> channel with a select line and read the pulse width. After it
> receives it, it selects the next channel and uses the pulse timer
> object. I could not get it to work with only one channel (using the
> servo output from the receiver) or multiple channels. The
> multiplexer circuit / program reads the channels about 20 times per
> second. I would love the RCIn object to work so I could do
> everything with virtual circuits...Oh well.
>
> --- In oopic@yahoogroups.com, "rtstofer" <rstofer@> wrote:
> >
> > --- In oopic@yahoogroups.com, "calpolyjdk" <calpolyjdk@> wrote:
> > >
> > > Counting the lines, isnt'e RC1 Line 17? In any event, I also
> tried
> > > placing the signal onto Line 16 and it still doesn't seem to be
> > > working. I'm trying to follow as best as I can the Object
> description
> > > of oRCIN(1-6), but again, no dice...
> > >
> > > Jonathan
> >
> > I must have gotten cross-eyed. RC1 is correct. Still a capture
> input.
> >
> > Try it with a single channel pulse. In fact, loop an oServo output
> > back to the oRCIN1 input and see what happens.
> >
> > Post your code. It should be pretty short.
> >
> > And describe how you have the system grounds tied together...
> >
> > Richard
> >
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/