[oopic] Re: Micro Second Delay

--- In oopic@yahoogroups.com, "rtstofer" <rstofer@...> wrote:
>
> --- In oopic@yahoogroups.com, Ranindu Dayananda <ranindu@> wrote:
> >
> > Is there any way to switch on and switch off a pin in less than 1
ms ?
>
> One thing that doesn't work is toggling the pin in code:
>
> -----------------------------
>
> Dim LED As New oDIO1
>
> Sub main()
>
> LED.IOLine = 7
> LED.Direction = cvOutput
>
> Do
> LED = Not LED
> Loop
>
> End Sub
>
> -----------------------------
>
> This takes 7 mS per pass through the loop or 14 mS for a complete
cycle.
>
> This is more in line with Andrew's estimate of 400 lines per minute
and
> these are pretty simple lines of code.
>
> Richard
>

Uh, that would be 400 lines per second...

Richard

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/