Re: [oopic] Re: Trouble connecting to OOPic-R via serial cable

Look for what else has that serial port open. Only one device at a time
can. Do you have a Hyperterm or similar running?

DLC

dhaukoos wrote:
> --- In oopic@yahoogroups.com, "rtstofer" <rstofer@...> wrote:
>
>>--- In oopic@yahoogroups.com, "dhaukoos" <dhaukoos@> wrote:
>>
>>>I am attempting to connect my PC to my OOPic-R for the first time, and
>>>I have a problem. From the OOPic IDE, I am getting the following error
>>>message, "Cannot find a serial cable connected to an ooPIC", when I
>>>press the button labeled 'Find Serial Cable' under Tools->Cable
>>>Configuration.
>>
>>Finding a serial cable doesn't always work. Just TELL the IDE where
>>to look. If you have the cable on COM1, specify it.
>>
>>Richard
>>
>
>
> Thanks for your response. I have tried specifying Comm 1 via the radio
> button selection. When I subsequently try to make and download (via
> the F5 key) the simple example from chap. 2 of the programmer's guide
> (Your first OOpic application), I get this message: "Error opening
> Comm 1, Port already open".
>
> Not sure what to try next. Any other thoughts?
>
> Dana
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>

--
===================================================
Dennis Clark ooPIC Technical Support
===================================================

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/