[oopic] Re: ooPIC-R - using All A2D pins?

--- In oopic@yahoogroups.com, "design.wonk" <design.wonk@...> wrote:
>
> The ooPIC-R has 7 analog pins, but the three are tied up with the LEDs
> and switches. Is there a simple way to gain access to pins 5,6 and 7
> for analog input?
>
> thanks
>

Unsolder the LEDs or the dropping resistors in front of the LEDs or
both. You might also consider unsoldering the resistors headed toward
the push buttons.

Richard

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/