[oopic] Re: Modified ooPIC-R

I was advised to add it if running 3A through the VR. Figured it
wouldn't hurt. I am waiting for additional sensors for a full-scale
test, but all A2D lines check out OK.

--- In oopic@yahoogroups.com, "rtstofer" <rstofer@...> wrote:
>
> --- In oopic@yahoogroups.com, "design.wonk" <design.wonk@> wrote:
> >
> > Thanks to all again for the input on my most recent prototype. I
> > modified an ooPIC-R to run 6 Sharp GP2YOA700K sensors. I made 2
> > additional A2D pins availble by removing the on-board LEDs and added
> > some extra cooling to the VR.
> >
> > Here is is:
> >
> > http://tech.ph.groups.yahoo.com/group/oopic/photos/view/650e?b=1
> >
>
> Does the VR get hot?
>
> Richard
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/