[oopic] Re: parallel to serial port

First I used a valid oopic parallel programming cable to the PC
printer port, LPTx, and connect to the the 5-pin PRG header on the
oopic board, and use the OOPic IDE parallel-programming mode.(the
cable could be identified by oopic's compiler)

But the thing is that when I want to print to my computer's screen I
had to use objects such as oSerial which they demand a serial
connection between my PC and OOPic.

Then I used a modem cable to connect my programming cable to the PC
COM port but the other side of the cable still goes to 5-pin PRG since
oopic original does not have a DB09 connector on OOPIC!

Is there any way to print the results I want on my comp's screen using
parallel_programming_mode?

naimead

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/