Re: [oopic] Stepper Motor Question

Marginally. Do you understand how steppers work? This one looks like
worst case, depending upon the model is nearly 500mA at 5V - At 12V
stall current is closer to 1Amp. The L293D will work OK with the
former, but it'll be close, and not at all with the latter.

DLC

jon_mark_go wrote:
> Will this motor:
> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=403-1006-ND
> work with this driver chip:
> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-2936-5-ND
> ?
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/