converter and gotten it to work.
DLC
rtstofer wrote:
>> Yes, been there, done that. For whatever the reason, on my
>>
> computer,
>
>> every comport below #9 indicates already in use, even though
>>
> nothing
>
>> is connected to the USB ports. I cannot select a comport value in
>>
> the
>
>> oopic IDE range.
>>
>
> Go ahead and select a port that is '(in use)' like COM4. I wouldn't
> select COM1 or COM2 if they physically exist on the computer as
> hardware serial ports or internal modems. Up comes a dialog
> complaining about the conflict. Click on Yes to confirm your choice
> to hose your system.
>
> Then close things out and reboot. The USB port will be reassigned
> when Windows restarts.
>
> I know this works because I just changed a USB->Serial adapter on
> COM13 to COM4 which was in use but not connected.
>
> With Hyperterminal, the USB->Serial adapters don't always connect on
> the first time HT is started. It isn't unusual for me to have to
> close the instance and start it over.
>
> Richard
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>
--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment