[oopic] Re: first time use

I am using Oopic S. I did use cross-reference the IOline to the
physical pin.

Reid

--- In oopic@yahoogroups.com, ooPIC Tech Support <dennis.clark@...>
wrote:
>
> What ooPIC are you using? The ooPIC R will have the IOLine labeled
as
> the actual IO line, the ooPIC S boards you need to cross-reference
the
> IOline to the physical pin.
>
> DLC
>
> funreido wrote:
> > I just starting to use it. I was trying to use first application
with
> > 220 ohm resistor and led. I got download into eeprom. But the
light
> > wont comes on. I test it with volt meter and there is no voltage
> > output. I test pin 21 and 23 and I see 5 volts output and I use
it
> > with led and resister. It was working fine. Here is program I use
it
> > for led.
> >
> > Dim Fred As New oDio1
> >
> > Sub Main()
> > Fred.Ioline = 7
> > Fred.Direction = cvOutput
> > Fred = 1
> > End Sub
> >
> > I tried to use 11 for pin 11 or 5 for pin 5. Still not working.
What
> > did I do wrong? I just same parallel cable and 9 volt cable that
comes
> > with it.
> >
> > Reid
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
> --
> ------------------------------------------------------
> Dennis Clark ooPIC Tech Support
> www.oopic.com
> ------------------------------------------------------
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/