My son and I are working on a school project using a OOPic II. We
are trying to make sure that the OOPic is working so we tried loading
a sample of the oLED object and hooked up a LED just to make sure that
everything was working ok but it is not. We do not get any errors when
downloading and can read the info from the eprom. I checked the ioline
with a volt meeter and there is no voltage so i tried changing the
ioline and still get the same result.
I looked up the troubleshooting on the website and everything looks
ok. i setup the programming cable again and the program finds it and
set the delay.
I have experiance with working with OOPics and have never seen this
and i am totaly lost why this is happening any ideas?
Thanks
Andy
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment