Re: [oopic] Re: recovery jumper

The jumper doesn't replace the socket.

One can always replace the socket with a soldered EEPROM if they want
to (highly dangerous without the jumper though) :)

At 01:37 PM 8/6/2008, Brian Lloyd wrote:
>Both approaches work. The real question is: which is going to cause
>more problems over the life of the product? Sockets are notorious
>problems and I prefer to solder all the chips in my designs. I would
>opt for the jumper myself.

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/