Re: [oopic] Re: Abandoning the OOPic (was: Wrong IOpack for Stepper Motor?)

I've not tried this - But two others have and it didn't work for them
using the V.6 compiler - Is your V.6 compiler the same version as the
one on the web site?

DLC

scottmsavage wrote:
> --- In oopic@yahoogroups.com, Brian Lloyd <Brian-wb6rqn@...> wrote:
>
>> If you are using an older chip (< C.1.1) then use V5. If you have
>> the newest chip, you have a problem.
>>
>
> So far, not one error has been detected in the C.1.1 chip. In fact,
> the purpose of this chip was to address the bugs identified in B.2.2.
>
> There have been some bugs discovered in the new Ver 6 compiler, such as
> the one in the event object. But these will be corrected when the
> next compiler release is ready. (Expect it around May 1st.)
>
> As for the IOPack issue in question... it appears to work just fine.
> Or at least I cannot get it to NOT work. (See other posts) But since
> you are advising the public: "If you have the newest chip, you have a
> problem." then perhaps you can upload a youtube video showing what test
> you performed to determine this, so that I can address the problem.
>
> Scott Savage
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/