Re: [oopic] Not a good start

Have you installed the Port95nt.exe driver? That needs to go in first
before the compiler so that the IDE has access to the parallel port
hardware. This isn't essential for anyone using a serial cable, but it
is essential for those using the parallel port.

DLC

Mike Martin wrote:
> Hello All
> Thanks for your answers so far. Since my last post I've downloaded and
> am using the ver 6 compiler on XP with an older OOPic A.2.0. I've
> changed to the correct device setting but when I attempt to find the
> parallel cable in the cable config I run into an error "Internal error
> in PortInp of I2CFuncs". I get the same error using a ver B.1.0 OOpic
> as well. I also get the error if I manually enter the correct hex
> value of the port I'm using as well. Is this a problem with the PC or
> should I just get a new OOPic? TIA. Mike.
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/