[oopic] Re: oSerialL - Really confused

--- In oopic@yahoogroups.com, "design.wonk" <design.wonk@...> wrote:
>

Another thing to do is to first get the oopic object communicating
with a PC rather than your MP3 device. Then when you connect it to
the MP3, you'll at least know something works.

> ->
> > I believe you need the Init values stuff inside main(). I tried
the following code and watched the outputs (bit-banged output and
real usart output) and they both idle high (expected as that matches
what the PIC does with Tx) and they are identical in timing:
> >
> > Dim s As New oSerialL
> > Dim x As New oSerialPort
> > Sub main()
> > s.IOLineS = 7
> > s.Baud = cv9600
> > Do
> > s = 48
> > x = 48
> > ooPIC.Delay=10
> > Loop
> > End Sub
> >
> > Richard
> >
>
>
> I tried moving the init inside the main, but it did not help. I
think
> that I will order the level shifter and see what is going on with
the
> MP3 player.
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/