>
> Thanks Dennis. I got the impression that it didn't need it because the
> website says: "In order to use the OOPic multi-language compiler with
> Windows NT or 2000, an additional file needs to be installed.." The
title to
> the section mentions XP but the lines below just say NT and 2000.
Anyway the
> port driver now works but only on my PC. On my laptop however the
compiler
> can't detect the parallel cable. The port is working and I can print
from it
> though. Any thoughts? There's no serial port on this laptop. Would I
have
> any success if I bought a USB-Serial converter ? I'd also need a
programming
> cable that was serial I suppose.
You can't do serial programming on a version less than B.2.0+
Does your laptop have a REAL parallel port at 0x378? Look in device
manager and see what you have. If you don't have the equivalent of an
ISA port (in other words you have some kind of PCI port), it won't work.
All in, it's going to be easier to get a newer chip or have yours
upgraded.
Richard
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment