Re: [oopic] Re: Question regarding bootloader

>
> Hey Richard. Thanks. That actually did work. I changed the port
> assignment, despite the warnings from the OS, and the change took
> place ok. I didn't even have to reboot. In addition, oopic IDE v.6
> was able to find the serial cable alright, since it was now <= COM6.
> I'll try the rebooting next to see if it stuck.
>
>
>
Dan

I have found that it is necessary to always use the same physical USB
port for my USB to Serial adapter. If a different physical USB port is
used then a different comm port will be assigned. This can also happen
if a different make of adapter is used to the one which was originally
used when mapping the comm port.

Ian

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/