>
> --- In oopic@yahoogroups.com, "zang206" <jprocknow@> wrote:
> >
> > I bought a OOPic ver B.1.0 a few years back and had no trouble using
> > it for a while. I had to shelf it for a few years and now that I am
> > trying to use it again I am having troubles configuring the OOPic IDE
> > to use a parallel port to program it. I am able to manually set the
> > port to 378 Hex and do a "find delay" ok. But when I try to do "find
> > parallel cable" or save the manual settings I get an error box saying
> > "Internal Error in PortInp of I2CFuncs." I have googled the error
> > message and also searched this group and could not find any answers.
> >
> > I am using WinXP and have made sure the port is turned on in the BIOS.
> > I have also removed and reinstalled the LPT port in WinXP settings.
> > I also tried using OOPic IDE v5 and V6. IDE v5 will just crash with
> > no error box when I try to setup the parallel port.
> >
> > Thanks for any help.
> >
> > Jason
> >
>
> Did you install Port95NT.exe as required? See www.oopic.com/dloadp.html
>
> Richard
>
I overlooked that. For some reason I thought I didn't have to install
it on XP. Thanks for the help. It works perfect now.
Jason
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment