[oopic] oSerialL and oLCDSE

I am doing some debugging so I connected a Parallax 2x16 serial LCD to
IOline 31. At first I tried to use an oLCDSE object but just got
garbage on the display. I then switched to using oSerialL (which is
what oLCDSE uses) and I am having no problem correctly writing to the
display.

Sure I could write my own routines to write data to the LCD but was
hoping I could somehow make the oLCDSE object work with the Parallax
display. Looking at the manual for the Parallax Serial 2x16 LCD and
the Scott Edwards LCD I am just not seeing a lot of difference so I am
stumped.

FWIW I am running at 2400 baud. I did try inverting the data to no
avail.

Suggestions?

Brian Lloyd
Granite Bay Montessori School 9330 Sierra College Bl
brian AT gbmontessori DOT com Roseville, CA 95661
+1.916.367.2131 (voice) +1.791.912.8170 (fax)

PGP key ID: 12095C52A32A1B6C
PGP key fingerprint: 3B1D BA11 4913 3254 B6E0 CC09 1209 5C52 A32A 1B6C

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/