Re: [oopic] Re: events again

I am sorry you must have missed my explanation on the voltage. In my last
response, just below your snip that you cut from my response, I put in that the
voltage reading was from a bad meter. I have tested it with another meter
and it does read 5 volts at pin 21. I put it in bold type so you could see it.
Sorry to get you side tracked and waste your time on that track.
I tried your code and again it does not go to the sub routine. The
green led blinks and changes from high to low intensity (I know it is not it the
code to do that) it goes through that pattern 3 or four times then the green
led comes on and stays on. but it never lights the red led as you have
specified in your subroutine code.
If I make the assumption that something is broken where do I go from
here? As I said before it controls the H bridge that runs the motors on my
robot. It runs the sound card. Using todo loops it responds to bumper switches. It
is so darn frustrating that everything that I have tried works except the
events.
How do I determine if it is the processor or the carrier board? What
could be broken that would allow the other program parts to work and not let
events work?
I know it is grasping at straws but is there any chance someone has a
C.1.1+ chip and a C carrier board that they could run this program on and see
if it is just the combination of board and chip that doesn't like events.

**************Biggest Grammy Award surprises of all time on AOL Music.
(http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003000000025
48)

[Non-text portions of this message have been removed]

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/