Re: [oopic] Program Resetting Upon Completion of Stepper Motor Script

It sounds like as soon as you turn things on your power bus tanks and
the ooPIC resets, which turns the power off allowing the ooPIC to turn
back on. Are you running the motor on the same power supply as the
ooPIC logic?

DLC

turgrid wrote:
> Hello,
>
> I am working with oopic-r c1.x+ and compiler 6.1.1. The h-bridge
> we're using is the L298 and is wired correctly as per the data sheet
> with ground and +5v for the oopic and the L298 both coming from the
> same battery source. The following snippet of code is
> looping--resetting the oopic upon execution of the last line. The
> behavior happens during similar scripts as well.
>
> code:
>
> oStepper stepper = New oStepper;
>
> Void Main(Void) {
> ooPIC.Delay = 500;
> stepper.IOPack = 3;
> stepper.Phasing = 1;
> stepper.Mode = 0;
> stepper.Rate = 124;
> stepper.Value = 800;
>
> stepper.Operate = 1
> }
>
> In this sample case, the stepper travels 800 steps and restarts and
> travels another 800 steps and restarts, etc.
>
> Why is it doing this and how can I stop it from resetting? Thanks in
> advance.
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>

--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/