[oopic] Re: Program Resetting Upon Completion of Stepper Motor Script

Yes, both the motor and oopic are on same power supply. Thanks for
your reply.

--- In oopic@yahoogroups.com, ooPIC Tech Support <dennis.clark@...> wrote:
>
> It sounds like as soon as you turn things on your power bus tanks and
> the ooPIC resets, which turns the power off allowing the ooPIC to turn
> back on. Are you running the motor on the same power supply as the
> ooPIC logic?
>
> DLC
>
> turgrid wrote:
> > Hello,
> >
> > I am working with oopic-r c1.x+ and compiler 6.1.1. The h-bridge
> > we're using is the L298 and is wired correctly as per the data sheet
> > with ground and +5v for the oopic and the L298 both coming from the
> > same battery source. The following snippet of code is
> > looping--resetting the oopic upon execution of the last line. The
> > behavior happens during similar scripts as well.
> >
> > code:
> >
> > oStepper stepper = New oStepper;
> >
> > Void Main(Void) {
> > ooPIC.Delay = 500;
> > stepper.IOPack = 3;
> > stepper.Phasing = 1;
> > stepper.Mode = 0;
> > stepper.Rate = 124;
> > stepper.Value = 800;
> >
> > stepper.Operate = 1
> > }
> >
> > In this sample case, the stepper travels 800 steps and restarts and
> > travels another 800 steps and restarts, etc.
> >
> > Why is it doing this and how can I stop it from resetting? Thanks in
> > advance.
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
> --
> ------------------------------------------------------
> Dennis Clark ooPIC Tech Support
> www.oopic.com
> ------------------------------------------------------
>

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/