[oopic] Re: Problem with events.

--- In oopic@yahoogroups.com, "aravind_2917" <aravind_2917@...> wrote:
>
> Iam trying to execute a piece of code whever serial data is recieved
> over the Serial port...I have oopic-R c.1.1+ firmware...till now i
> have not been successful with any event driven program..can u please
> tell me whats wrong with the following code...
>
> Delay=2000;
> oEvent ev=New oEvent;
> oSerialPort sp=New oSerialPort;
> Void main(Void){
> Delay=2000;
>
> oLED l=New oLED;
> oWire w=New oWire;
> oWire w2=New oWire;
>
>
> ev.Operate=0 // initially to make sure ev.operate=0
> l.IOLine=5;
> sp.Operate=1;
>
> w.Input.Link(sp.Received);
> w.Output.Link(l.Operate);//trying to switch on an in built led
> w.Operate=cvTrue;
>
> w2.Input.Link(sp.Received);
> w2.Output1.Link(ev.Operate);
> w2.Operate=cvTrue;
>
> }
>
> Void ev_Code(){ //this code is not being executed
> oLED l3=New oLED;
> l3.IOLine=7;
> l3.TurnOn;
> oInt i=New oInt;
> While(sp.Received!=0){ //trying to read from sp buffer
> i=sp.Value; //till sp.recieved is set to 0.
> }
> }
>
> someone give me a code with which i can test whether events are
> working on my board...OOPIC-R c.1.1+
>
> Thank you
>

You can find a lot of sample code in one of the OOPic subdirectories.
You can also find small examples for each object in the on-line
documentation.

In the meantime, you can't allocate objects within functions. They
must all be global. Look through the samples.

Richard

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/