[oopic] Program Resetting Upon Completion of Stepper Motor Script

Hello,

I am working with oopic-r c1.x+ and compiler 6.1.1. The h-bridge
we're using is the L298 and is wired correctly as per the data sheet
with ground and +5v for the oopic and the L298 both coming from the
same battery source. The following snippet of code is
looping--resetting the oopic upon execution of the last line. The
behavior happens during similar scripts as well.

code:

oStepper stepper = New oStepper;

Void Main(Void) {
ooPIC.Delay = 500;
stepper.IOPack = 3;
stepper.Phasing = 1;
stepper.Mode = 0;
stepper.Rate = 124;
stepper.Value = 800;

stepper.Operate = 1
}

In this sample case, the stepper travels 800 steps and restarts and
travels another 800 steps and restarts, etc.

Why is it doing this and how can I stop it from resetting? Thanks in
advance.

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/