DLC
richard6406 wrote:
> Hi there,
>
> New to robotics / oopic / CMUcam .... but as have started building
> something that combines all I've been doing a lot of reading :)
>
> Not sure if this helps but came across it recently :
> http://www.instructables.com/id/Interfacing-a-CMUCam2-to-an-OOPIC/
>
> Wishing you all the best.
>
> Richard
>
>> Hello all,
>>
>> I'm trying to get my oopic to talk to my cmucam2. I'm using the
>> oSerialport object. I'm running a very basic program to see if I'm
>> actually receiving anything. The most important command is:
>>
>> LCD.VString = Str$(s.Received)
>>
>> I get 0's on my LCD all the time. Except once, I went to lunch and
>> when I came back it was 00001, I have no idea what happened.
>>
>> Anyway, the cmucam manual states that it uses 8 data bits, 1 stop bit,
>> no flow control and no parity. I couldn't find any mention of stop
>> bits for the oopic. Is this the problem?
>>
>> Other than that I'm quite certain the connections are right. If anyone
>> could help I'd be very grateful.
>>
>> Ash
>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
--
------------------------------------------------------
Dennis Clark ooPIC Tech Support
www.oopic.com
------------------------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment