Re: [oopic] Re: Help with incoming Serial Communcation from PC to ooPic-R I2c LCD03

At 04:36 PM 12/12/2007, Angelo wrote:
>Hi Dennis/Richard,
>
>Thanks for your help.
>
>I have got the LCD03 working in serial mode and the setup the serial
>commincation with my PC.
>
>Here is the code I used if future users require it:
>Dim LCD03 As New oSerialL
>Dim SP As New oSerialPort
>
>Sub Main()
> ooPIC.Delay = 4000
> SP.Baud = cv9600
> SP.Operate = cvTrue
> LCD03.IOLineS = 16
> LCD03.Baud = cv9600
> LCD03.Value = 12
> LCD03.Value = 4
> LCD03.Value = 19
> Do
> If S.Received Then

S? Should be SP.

> LCD03.Value = SP.Value
> End If
> Loop
>End Sub

BTW, all of your .Value strings are redundant (x.Value and plain x
are the same thing)

...Andy

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/