[oopic] Re: Problems with IDE / first time user

According to the object list, this should work in this firmware. I
understand about the 1-7 lines being a/d or d/a types. I can use oDio
for this app but I cannot adjust voltage level for brightness on other
lines. I thought in the OOPIC charts if they have an X, the firmware
can use the object, no?
Jeff K. Burbank, CA

--- In oopic@yahoogroups.com, "dan michaels" <oric_dan@...> wrote:
>
> --- In oopic@yahoogroups.com, "jeffkaypic" <jeffkaypic@> wrote:
> >
>
>
> Dennis probably knows offhand the reason for your compile time error.
> I don't see an oLed object for version B.2.2+ chips. Try using oDIO1.
>
> Also ... don't use IOlines 1-7 for digital I/O. Rather, reserve them
> for A/D inputs. People run into nothing but trouble here, because of
> the flukey way that Microchip asigns pins between digital and analog
> I/O [this is not really an oopic problem].
>
>
>
>
> > Hi, I have a OOPICII+ in a OObot-40II board. I am running the 5.x
> > IDE on a Win98 computer (so I can't run ver. 6). I have
> succesefully
> > loaded and ran a tone generating program via the serial and parallel
> > port methods. My problem is, that when I try to compile the code
> > below (lifted from OOPIC site) I get an error saying that basic
> > expects a class object--something to the effect that it does not
> know
> > what the object is. In this version, oLED should work, correct?
> Do I
> > have to tell the IDE something more about firmware? I have selected
> > the B.2.x+ in the target menu.
> >
> > Trying to load:
> > 'This program causes an LED on I/O
> > 'Line 7 to change brightness.
> >
> > Dim A As New oLED
> >
> > Sub Main()
> > A.IOLine = 7
> > A.Operate = cvTrue
> > Do
> > ooPIC.Delay = 20
> > A.Brightness = A.Brightness + 1
> > Loop
> > End Sub
> >
> > Jeff K. Burbank
> >
>

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/