[oopic] Re: Problems with IDE / first time user

--- In oopic@yahoogroups.com, "jeffkaypic" <jeffkaypic@...> wrote:
>

Dennis probably knows offhand the reason for your compile time error.
I don't see an oLed object for version B.2.2+ chips. Try using oDIO1.

Also ... don't use IOlines 1-7 for digital I/O. Rather, reserve them
for A/D inputs. People run into nothing but trouble here, because of
the flukey way that Microchip asigns pins between digital and analog
I/O [this is not really an oopic problem].

> Hi, I have a OOPICII+ in a OObot-40II board. I am running the 5.x
> IDE on a Win98 computer (so I can't run ver. 6). I have
succesefully
> loaded and ran a tone generating program via the serial and parallel
> port methods. My problem is, that when I try to compile the code
> below (lifted from OOPIC site) I get an error saying that basic
> expects a class object--something to the effect that it does not
know
> what the object is. In this version, oLED should work, correct?
Do I
> have to tell the IDE something more about firmware? I have selected
> the B.2.x+ in the target menu.
>
> Trying to load:
> 'This program causes an LED on I/O
> 'Line 7 to change brightness.
>
> Dim A As New oLED
>
> Sub Main()
> A.IOLine = 7
> A.Operate = cvTrue
> Do
> ooPIC.Delay = 20
> A.Brightness = A.Brightness + 1
> Loop
> End Sub
>
> Jeff K. Burbank
>

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/