[oopic] Re: Fwd: New user

--- In oopic@yahoogroups.com, "jeffkaypic" <jeffkaypic@...> wrote:
>
> Will 6 run in Win 98? I thought vers 6 only works on XP? My
problem is I need parallel and serial so my modern PC could do serial
via serial/USB adapter but then I am SOL for parallel...
>

As Richard says, there is probably no need to rush into the version
C.1 chip. For one thing, there has been no formal announcement of its
release. Also, no one has said whether it has been totally debugged.

Also, you can do most things you will want to do with the B.2.2+
chip. As Dennis said, you can use the oPWMX object [works on any I/O
pin] if you need graded light intensities in your Led.

Also, as Richard says, and also your documentation says, you can do
all of your programming on the B.2.2+ chip using the serial port, and
don't need parallel. On a notebook PC, a USB-to-RS232 dongle work
fine. The OOPic IDE cannot find the dongle automatically, but you can
manually set the serial port [must be COM1-COM4 range], and go ahead.

>
> --- In oopic@yahoogroups.com, ooPIC Tech Support <dennis.clark@>
wrote:
> >
> > What compiler are you using? If you are using the 6.11 release
it
> > should work fine. If you are using one of the 5.xx compilers
then if
> > you are not using the Basic syntax, in some cases the new object
types
> > will also error out. Your best bet is to download the 6.11
compiler
> and
> > IDE.
> >
> > DLC
> >
> > > Hello all,
> > >
> > > I'm a new user who just received an oopic kit. My experience is
> > > limited to some C++ and intel 8051 programming.
> > >
> > > I'm having a little trouble...
> > >
> > > In the programmers guide (http://www.oopic.com/pgchap2.htm),
there's a
> > > small program to blink an LED. The hardware is no problem, but
when I
> > > copy/paste the code into the compiler and attempt to download I
get
> > > the following error:
> > >
> > > "The identifier 'oLED' has not been defined"
> > >
> > > Please help and excuse my noobiness :(
> > >
> > > Thanks
> >
> > --
> > ------------------------------------------------------
> > Dennis Clark ooPIC Tech Support
> > www.oopic.com
> > ------------------------------------------------------
> >
>

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/