is I need parallel and serial so my modern PC could do serial via
serial/USB adapter but then I am SOL for parallel...
--- In oopic@yahoogroups.com, ooPIC Tech Support <dennis.clark@...> wrote:
>
> What compiler are you using? If you are using the 6.11 release it
> should work fine. If you are using one of the 5.xx compilers then if
> you are not using the Basic syntax, in some cases the new object types
> will also error out. Your best bet is to download the 6.11 compiler
and
> IDE.
>
> DLC
>
> > Hello all,
> >
> > I'm a new user who just received an oopic kit. My experience is
> > limited to some C++ and intel 8051 programming.
> >
> > I'm having a little trouble...
> >
> > In the programmers guide (http://www.oopic.com/pgchap2.htm), there's a
> > small program to blink an LED. The hardware is no problem, but when I
> > copy/paste the code into the compiler and attempt to download I get
> > the following error:
> >
> > "The identifier 'oLED' has not been defined"
> >
> > Please help and excuse my noobiness :(
> >
> > Thanks
>
> --
> ------------------------------------------------------
> Dennis Clark ooPIC Tech Support
> www.oopic.com
> ------------------------------------------------------
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment