22, 23. I test each I/O using the LED program, the program is the one
from the oopic webpage (Chapter 2 - Your first ooic application). I
like to do this to make sure the oopic is working properly, saves me
the headache down the line. I did this test I found that I/O 23 never
has an output, when 21 is powered 21 and 22 have an output, but when
just 22 is tested only 22 outputs a signal. Not sure what the problem
is but these are the only 3 ports with a problem. Is there a hardware
issue, a firmware issue or is this a normal operation for the oopic.
I don't believe that the last one is proper but just have to check.
It was suggested that ths maybe how it operates, but I don't believe
that.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/oopic/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/oopic/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
No comments:
Post a Comment