Re: [oopic] OOPic-R board problem

first, try the"cosmic wedgie" recovery. Let us know if that works.

DLC

ooPIC Tech Support

-----Original Message-----

From: "robot8868" <robot8868@yahoo.com>
Subj: [oopic] OOPic-R board problem
Date: Thu Oct 18, 2007 11:24 pm
Size: 918 bytes
To: oopic@yahoogroups.com

I have an OOPic-R board with firmware C.1.1+. After applying the power
to the board, the power good LED does NOT light up. Connect through RS-
232 with PC does not show any response. But pushing the 3 little
buttons on the board do light up the LED on top of it. Is the board
defective? How I can check if the OOPic is working ok?

Yahoo! Groups Links

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/oopic/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/oopic/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:oopic-digest@yahoogroups.com
mailto:oopic-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
oopic-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/